show auto-sense dhcp-detection

Displays the Auto-sense configuration related to DHCP server auto-detection.

Syntax

show auto-sense dhcp-detection

Default

None.

Command Mode

User EXEC

Command Output

The show auto-sense dhcp-detection command displays the following information:


Output field	Description
ENABLED	Displays the status of DHCP detection.
MAC ADDRESS	Displays the MAC address associated with the DHCP server IP address.
PORT	Displays the port that learns the MAC address.

Example

The following example displays command output.

Switch:1>show auto-sense dhcp-detection
==========================================================================================
                                DHCP SERVER AUTO-DETECTION
==========================================================================================
ENABLED    MAC ADDRESS                    PORT
------------------------------------------------------------------------------------------
TRUE
------------------------------------------------------------------------------------------
00:26:55:dc:96:19              1/1                            
------------------------------------------------------------------------------------------
 0 out of 0 Total Num of AUTO-SENSE entries displayed
------------------------------------------------------------------------------------------